used CNC Machining Centre DMG DMF 360
| manufacturer: | DMG |
| type: | DMF 360 |
| built: | 2005 |
| control: | SINUMERIK 840 D-powerline |
Technical Equipment/Features
| Travels: | |
| X-axis (column longitudinal) | 3.600 mm without dividing wall |
| X-axis (column longitudinal) | 2 x 1.450 mm with dividing wall |
| Y-axis | 920 mm |
| Z-axis (vertical) | 820 mm |
| table: | |
| clamping size | 4.200 x 900 mm |
| max. table load (central on the table) | 4.200 kg |
| clamping slots | 8 x 14 H12 mm |
| direction slot in table centre | 1 x 14 H7 mm |
| milling spindle: | |
| max. power (40 % ED) | 35 kW |
| max. torque (40 % ED) | 130 Nm |
| max. speed | 12.000 min-1 |
| tool taper | HSK 63 |
| feed, rapid feed: | |
| feed range in X-Y-Z-axis | 1-20.000 mm/min |
| rapid feed in X-axis | 100 m/min |
| rapid feed in Y-Z-axis | 60 m/min |
| feed power in Y- and Z-axis | AC-Servo Motor |
| feed power in X-axis | Synchron-Linear Motor |
| tool magazin, tool changer: | |
| number of places | 126 |
| tool taper | HSK 63 |
| machine dimensions: | |
| space requirement | ca. 11 x 4,2 x 3,3 m |
| machine weight | ca. 29.500 kg |
| total weight | ca. 33.150 kg |
| equipment, accessories |
| • Control SINUMERIK 840 D powerline • Electronical handwheel • Spindle 12.000 1/min HSK-A63 • Shelf wall magazine with 126 tool places • working dividing wall • automatic doors • hydraulic clamping device with max. 240 bar, clamping pressure supply line for each table side, prop-valve technology • oil and emulsion exhausting • laser tool measurement - can only be used as drill breakage control • NC dividing attachement RW/NC 220 with horizontal swivelling axis • Coolant equipment with high pressure pump 40/80 bar for internal cooling, coolant lubricant temperature control • Paper band filter for internal coolant supply • Scraper tape chip conveyor • RENISHAW infrarot probe system with 3-D-touch probe • Flushing gun • Spindle cooling unit KGL 6 • Working area closed at top • Machine ON: 42.700 h, spindle ON: 14.100 h |