CNC-Turning and Milling Machine MAG NDM 450-4-300
Video about the machine
Details
| Make: | MAG |
| Type: | NDM 450-4-300 |
| Built: | 2008 |
| Control: | SINUMERIK 840 D - power line |
Description
Very stable (32 to.) CNC turning and milling centre with Y- and B-axis, tool changer, steady rest and counter spindle for complete machining of workpieces up to 3,000 mm length.
Comparable manufacturers and types:
- WFL M40-G x 3,000 mm
- DMG MORI CTX GAMMA 3000 TC
| Working area | |
| Swing Ø over bed | 700 mm |
| Swing Ø over X-carriage | 600 mm |
| Turning Ø | 450 mm |
| Turning length | 3.000 mm |
| Main spindle | |
| Integrated spindle motor with C-axis | 0,01° |
| Spindle nose DIN 55026 Typ A | size 8 |
| Spindle bore | 100 mm |
| Spindle diameter in front bearing | 150 mm |
| Clamping chuck | FORKARDT 3 QLC/K315 |
| Max. power, ED 40 % | 95 kW |
| Max. torque, ED 40 % | 800 Nm |
| Spindle speed | 0-3.100 min-1 |
| Counter spindle | |
| Integrated spindle motor with C-axis assembled at lower NC-carriage | 0,01° |
| Spindle nose DIN 55026 Typ A | size 8 |
| Spindle bore | 100 mm |
| Spindle diameter in front bearing | 150 mm |
| Clamping chuck | FORKARDT 3 QLC/K315 |
| Drive power, ED 40 % | 95 kW |
| Max. torque, ED 40 % | 800 Nm |
| Spindle speed, max. | 0-3.100 min-1 |
| Longitudinal travel | 3.100 mm |
| Feed max. | 30 m/min |
| Max. feed force, ED 100/25 % | 10/18 kN |
| Diameter ball screw | 50 mm |
| Measuring system W-axis | rotativ |
| Turn-mill spindle carrier at upper left carriage | |
| With integrated Y-axis under 45° | [nbsp] |
| X-Y-Z-axis | 455 x +/-75 x 2.600 mm |
| Rapid feed X-Y-Z | 30 m/min |
| Max. working feed X-Y-Z | 15.000 mm/min |
| Measuring system X- and Y-axis | direkt |
| B-axis on that upper left carriage with integrated motor spindle | |
| Max. power, ED 100/40 % | 35/48 kW |
| Max. torque, ED 40 % | 128 Nm |
| Swivel range B-axis | +/- 105° |
| Tool taper | HSK-A 63 |
| Spindle speed max. | 7.000 min-1 |
| Automatic tool changer for B-axis with HSK-A 63 interface. Tool magazine with 40 pc. tool places for HSK-A 63 tool tapers. | |
| Longitudinal and cross slide at upper right carriage with 12-fold tool turret with driven tools | |
| Cross travel (X2 | 265 mm |
| Longitudinal travel (Z2) | 3.050 mm |
| Rapid feed Z-axis | 30 m/min |
| Rapid feed X-axis | 15 m/min |
| Max. feed power, ED 100/25 % | 10/18 kN |
| Tool taper | VDI 50 |
| Max. speed of driven tools | 3.200 min-1 |
| Max. power of driven tools 25% | 10 kW |
| Max. torque of driven tools 25% | 100 Nm |
| NC-carriage lower left | |
| Equipped with self-centering steady | SMW SLU 5 |
| Clamping range | 50-310 mm |
| Rapid feed | 15 m/min |
| CNC-control | |
| SIEMENS, SINUMERIK 840 D power line | [nbsp] |