| manufacturer: | AXA |
| type: | VHC 3-XTS/50 |
| built: | 2006/2017 |
| travels X-Y-Z: | 2.600 x 900 x 850 mm |
| control: | HEIDENHAIN iTNC 530 |
Technical Data
retrofitted 5-axis CNC-Machining Centre
NC-rotary table, RTA5S
| diametre: | 1.500 mm |
| Theoretical loading capacity: | 10.000 mm |
| Hydraulical clamping in working position | |
| programmable in steps of 0,001° | |
| measuring system HEIDENHAIN |
axis-strokes
| Longitudinal (X-axis): | 2.600 mm |
| Cross (Y-axis) milling head in vertical pos.: | 900 mm |
| Cross (Y-axis) milling head in horizontal pos.: | 700 mm |
| Vertical (Z-axis) milling head in horizontal pos.: | 850 mm |
| Vertical (Z-axis) milling head in vertical pos.: | |
| distance table - spindle nose vertical/horizontal: | 0-790/250 - 1.100 mm |
| linear scales in all axis, temperature compensation | |
| in Y- and Z-axis incl. sensors and software |
feed rate
| X-, Y- and Z-axis stepless: | 1-9.999 mm/min |
| max. force: | 9.000 N |
| rapid feed X/Y/Z: | 40/40/30 m/min |
main spindle, headstock
| AC-mainspindle motor at 40% ED: | 56 kW |
| rpm - range stepless: | 30 - 9.000 min-1 |
| torque at 40 % ED: | 357 Nm |
| tool taper: | SK 50 - DIN 69871 A/69872 A |
| spindle diam. in front bearing: | 100 mm |
| milling spindle liquid-cooled: |
1-axis milling head
| B-axis: | +/- 90 ° swivelling |
| hydraulic clamping in working position | |
| programmable in steps of 0,001° | |
| M19 automaticaly or programmable | |
| rigid tapping | 100 mm |
tool changer - extended tool shop - XTS-magazine
| tool change position: | vertical |
| no. of tools: | 60 |
| time for tool changing: | ca. 6 sec. |
| chip to chip time: | ca. 9 sec. |
| tool diam (all places used): | max. 110 mm |
| tool diam. (neighbour-places free): | max. 180 mm |
| tool length: | max. 400 mm |
| tool weight: | max. 15 kg |
CNC-control
HEIDENHAIN iTNC 530
combinied with digital drives, 15"-TFT screen
guideways
hardened flat guideways with laminated "TURCITE"
column, milling head
X- and Y-slide, Z-column and milling-head from cast iron
coolant unit, chip conveyor
coolant through spindle, coolant tank with 800 l,
high-pressure-pump up to max. 40 bar
chip conveyor
working area
fully closed working area (closed on top) with manual doors
touch probe
RENISHAW MP 10 E touch probe, changeable with the tool changer
equipment, accessories
| 5-axis machining centre with X-, Y-, Z-, B- and C-axis |
| AXA rotary table RTA5S - Ø 1.500 mm, 0,001° positionable |
| CNC-control HEIDENHAIN iTNC 530 |
| electronical hand wheel |
| touch probe RENISHAW |
| milling spindle SK 50, 56 kW, 9.000 min-1 |
| 1-axis swivelling milling head +/- 90°, 0,001° positionable |
| temperature compensation in Y- and Z-axis |
| linear scales in X-, Y- and Z-axis |
| 60-fold tool changer XTS |
| internal coolant supply max. 40 bar |
| chip conveyor |
| dust exhausting |
overhauling in 2017 with following scope of services
| geometry overhauling of X-guideways by company AXA |
| geometry overhauling of Y-guideways by company AXA |
| geometry overhauling of Z-guideways by company AXA |
| renew of ball screws X-axis by company AXA |
| renew of ball screws Y-axis by company AXA |
| renew of ball screws Z-axis by company AXA |
| bearings of milling spindle renewed in 04-2015 by company AXA |
| new set of gaiter |
| new painting |