| manufacturer: | IMSA |
| type: | MF 2500 BB |
| built: | 2012 |
| control: | HEIDENHAIN iTNC 530 |
Offer Data
CNC-Deep Hole Boring- and Milling Machine
working area
| travel X-axis: | 3.300 mm |
| distance milling spindle - boring spindle: | 250 mm |
| vertical travel of the milling- and boring unit (Y-axis): | 1.505 mm |
| horizontal travel of the milling- and boring unit (W-axis): | 515 mm |
| travel of milling spindle (Z-axis): | 500 mm |
| travel of boring spindle (V-axis): | 2.415 mm |
| tilting of milling- and boring unit (A-axis) | +/- 15° |
| feed rate max. X,Y,Z,U,V,W | 10 m/min |
work piece table
| clamping surface: | 2.500 x 2.000 mm |
| max. table load: | 30.000 kg |
| rotating: | +/- 360°, resolution 0,001° |
| travel of the table (U-axis): | 1.000 mm |
milling spindle
| power S1/S6: | 17,0/20,5 kW |
| torque S1/S6: | 564/680 Nm |
| speed: | 1-2.500 min-1 |
| tool taper : | HSK-A 100 |
boring spindle
| power S1/S6: | 17,0/25,0 kW |
| torque S1/S6: | 194/286 Nm |
| speed: | 1-8.000 min-1 |
| tool taper | whistle notch 40 x 70 |
tool changer for milling spindle
| no. of tools in magazine: | 20 |
| max. tool diam. x tool length: | 100 x 400 mm |
| tool encoding: | BALLUFF-System |
coolant device
| coolant medium: | Oil |
| tank capacity: | 600-1.200 l |
| power of hydro pump: | 4-11 kW |
| oil pressure self regulating: | 15-100 bar |
| oil floting self regulating | 5-150 l/min |
| oil temperature (chiller) | 27-30° |
dimensions, weight
| l x w x h | 10 x 5,9 x 3,9 |
| weight: | ca. 65.000 kg |
Accessories
|
A very well kept Deep-Hole Boring- and Milling Machine suitable for milling and deep-hole-boring works in on clamping |
| Coolant device with chip-conveyor and band-filter |
| at the moment used with boring-oil |
| Complete guarding of the working area |
| 20-fold tool changer HSK-A 100 |
| CNC-control HEIDENHAIN iTNC 530 |
| touch probe infra-red RENISHAW MP 700 |
| dust exhausting for oil-dust |
| fire-fighting system CO2 based |