CNC-Gear Shaping Machine LORENZ LS 82
Details
| Make: | LORENZ |
| Type: | LS 82 |
| Built: | 1999 |
| Control: | SIEMENS 840 C |
Do you have any questions?
Equipment
- Stroke positioning adjustment controlled by CNC
- Stroke length adjustment mechanical-manually
- Machine is fixed to the ground with specific damping shoes (part of the delivery scope)
- Oil mist exhaust system
- Tailstock
- Shaping spindle and lift of shaping head equipped with hydrostatic bearing
|
| Working area |
|
| Max. external work-piece diameter |
80 mm |
| Max. nominal modul shapable |
5 mm |
| Max. gearing width (straight gear) |
44 mm |
| Adjustment of axis angle |
[nbsp] |
| Shaping spindle - workpiece table |
+0,5 bis +0,5° |
| Stroke range |
250-1.500 DH/min |
| Centre distance table/shaping spindle |
-15 bis+170 mm |
| Max. stroke length |
55 mm |
| Max. helix angle |
45 Grad |
| Max. tool diameter |
180 mm |
|
| Feed range |
|
| Feed rotation axis tool (relating to 100 mm work piece ∅) |
10 to 9.420 mm/min |
| Feed rotation axis of work piece (reltating to 100 mm workpiece ∅) |
10 to 15.700 mm/min |
| Feed center axis of machine column |
1 to 3.750 mm/min |
|
| Dimensions, weight |
|
| Required space ca. |
4,2 x 2,6 x 2,6 m |
| Machine weight ca. |
8.500 kg |
|
| Electrical supply |
|
| Total power consumption |
23 kVA |
| Operating voltage |
400 V |
| Operating frequency |
50 Hz |
| Control voltage |
24 V DC |
dumpTemplateVars(); ?>
field('gallery')->value()) ?>
field('gallery#0')->value
field('gallery')->value()) ?>
field('gallery#0')->value()) ?>
field('gallery#0')->value()) ?>
field('gallery#0')->value()) ?>
Go back
field('gallery')->value()) ?>
field('gallery#0')->value
field('gallery')->value()) ?>
field('gallery#0')->value()) ?>
field('gallery#0')->value()) ?>
field('gallery#0')->value()) ?>
Go back
Go back
field('gallery#0')->value
field('gallery')->value()) ?>
field('gallery#0')->value()) ?>
field('gallery#0')->value()) ?>
field('gallery#0')->value()) ?>
Go back
Go back
Go back
field('gallery#0')->value()) ?>
field('gallery#0')->value()) ?>
field('gallery#0')->value()) ?>
